Class 10 Light Reflection And Refraction CBSE Questions & Answers
Class 10 · Light Reflection And Refraction
Class 10 Light–Reflection and Refraction CBSE Questions & Answers. There are 15 questions in this test with each question having around four answer choices.
Questions & Answers
1
An object of size 2.5 cm is kept perpendicular to the principal axis of a concave mirror. The distance of the object from the pole of the mirror equals the radius of curvature of the mirror. The size of the image formed is
- A5.0 cm
- B1.25 cm
- C3.5 cm
- D2.5 cmCorrect
2
The image of a bright object is brought on a screen with the help of a concave mirror. If the upper half of the concave mirror is covered, the effect on the image will be
- Athe image disappears
- Bbrightness reducedCorrect
- Cits size becomes half
- Dimage changes position
3
For experimentation, the principal axis of the lens should be
- Aanywhere, it hardly matters.
- Binclined at angle of \({\rm{4}}{{\rm{5}}^0}\) to the length of optical bench
- Cparallel to the length of the optical benchCorrect
- Dnormal to the length of the optical bench
4
Magnification for a plane mirror is m = +1 what does this signify for m = 1
- Am = 1, signifies that the image is of diminished size.
- Bm = 1, signifies that the image is of the same size as the objectCorrect
- Cm = 1, signifies that the image is of the bigger size as the object
- Dm = 1, signifies that the image is of the smaller size as the object
5
The nature of image is not affected by the position of the object is-
- AConcave mirror
- BPlane mirror
- CConvex mirror
- DBoth Plane mirror and Convex mirrorCorrect
6
A spherical mirror and thin spherical lens have each a focal length -15 cm.
- AThe mirror is convex, but the lens is concave.
- BBoth are concaveCorrect
- CThe mirror is concave, but the lens is convex.
- DBoth are convex
7
No matter how far you stand from a spherical mirror, your image appears erect. The mirror may be.
- Aconcave
- BEither plane or convex
- Cplane
- DconvexCorrect
8
When two lenses of powers +4D and -3D are placed in contact, the power of the resultant lens is
- A+1DCorrect
- B7D
- C-1D
- DNone of the above
9
A sharp image of a distant object is obtained on a screen by using a convex lens In order to determine the focal length of the lens, you need to measure the distance between the
- Aobject and the screen
- Blens and the screenCorrect
- Clens and object
- Dlens and the screen and also object and the screen
10
At the point of emergence, the angle of emergence is measured with respect to the
- Aedge of the slab
- Bnormal at the point of emergenceCorrect
- Cdirection of the refracted ray
- Ddirection of incident ray
11
In a glass slab with parallel faces, refraction occurs
- Aat two opposite sides onlyCorrect
- Bat one side only
- Con all its sides
- Dat three of its sides
12
The extent to which a ray of light travelling in one medium and entering the second medium bends depends on the
- Anone of the above
- Bspeed of lightCorrect
- Cfrequency of light
- Dwavelength of light
13
The lateral displacement of an incident ray passing out of a rectangular glass slab
- Anone of the above
- Binversely proportional to the thickness of the glass slab
- Cindependent of the thickness of the glass slab
- Dis directly proportional to the thickness of the glass slabCorrect
14
The difference between angle of incidence and angle of emergence is
- A\({\rm{6}}{0^0}\)
- B\({0^0}\)Correct
- C\({\rm{18}}{0^0}\)
- D\({\rm{9}}{0^0}\)
15
Sanjay is standing at a distance of 2m in front of a plane mirror. The distance between Sanjay and his image will be
- A3m
- B2m
- C4mCorrect
- D6m